Fitting The Drill Head; Installation - Optimum OPTIdrill B 34H Betriebsanleitung

4.2.4

Fitting the drill head


Put the intermediate plate on
the drilling column.

Fix the intermediate plate with
the cap screws on the drilling
column.

Put the drilling head on the
intermediate plate and turn it
as much until is aligned with
the stand.

Fix the drilling head with the
cap screws on the intermedi-
ate plate.
4.3

Installation


Check the horizontal orientation of the base of the geared drill with a spirit level.

Check if the underground is sufficiently stable and rigid. The total weight amounts to 276 kg
and 290 kg.

Position the geared drill on the intended foundation.

Fix the geared drill in the provided through-holes on the machine foot.
WARNING!
The condition of the underground and the fixing type of the machine foot to the
underground must be in a way that it can bear the loads of the geared drill. The
substructure needs to be even. Check if the underground of the geared drill is level
using a spirit level.
Assembly
Version 1.1.3 - 2020-07-21
Cap screws
Intermediate plate
Cap screws
Abb.4-7:
Translation of the original instructions
Assembling drill head
B34H | B34HV GB
91