Intended Use; Reasonably Foreseeable Misuse - Optimum OPTIdrill DH 40G Betriebsanleitung

Switching on forbidden!
Wear protective glasses!
1.3

Intended use

WARNING!
In the event of improper use, the drilling milling machine

will endanger personnel,

will endanger the machine and other material property of the operating company,
the functionality of the drilling milling machine may be compromised.
The geared drill is designed and manufactured for holes in cold metals or other non flammable
materials or that not constitute a health hazard using a rotating filing-stripping tool that has a
number of grooves for collecting the filings.
If the geared drill is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you
observe the limits of the geared drill,

the operating manual is observed,

the inspection and maintenance instructions are observed.


The following information represents the dimensions and indications of weight and the man-
ufacturer's approved machine data. on page 60
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
geared drill! They could endanger the personnel and cause damage to the geared drill.
1.4

Reasonably foreseeable misuse

Any use other than that specified under "Intended use" or any
use beyond that described will be deemed non-intended use and is not permissible.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the geared drill.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before first commissioning.
Operators must be qualified.
Safety
Version 1.0.1 - 2020-11-24
Use ear protection!
Wear protective gloves!
Translation of original instructions
Pull out the mains plug!
Read the operating
instructions before
commissioning!
Wear safety shoes! Wear a protective suit!
DH40G | DH40GP EN
51