Safety During Operation; Safety During Maintenance; Disconnecting And Securing The Geared Drill; Using Lifting Equipment - Optimum OPTIdrill B 34H Betriebsanleitung

1.15

Safety during operation

We specially point out the specific dangers when working with and on the geared drill.
WARNING!
Before switching on the geared drill make sure that there are no

no dangers generated for persons,

not cause damage to equipment.
Avoid any risky working practices:

Make sure, your work does not endanger anyone.

The instructions mentioned in these operating instructions have to be strictly observed
during assembly, operation, maintenance and repair.

Do not work on the geared drill, if your concentration is reduced, for example, because you
are taking medication.

Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company.

Inform the supervisor about all endangerments or errors.

Stay at the geared drill until all movements have come to a complete standstill.

Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.

Do not use protective gloves when drilling or milling.
1.16

Safety during maintenance

Inform the operators in good time about any maintenance and repair works.
Report all safety relevant changes and performance details of the geared drill. Document all
changes, have the operating manual changed accordingly and train the machine operators.

1.16.1 Disconnecting and securing the geared drill

Switch off the geared drill with the main switch and secure the main switch with a padlock
against unauthorised switching-on or switching-on by accident.
All machine parts as well as any dangerous voltages are switched off. Excepted are only the
positions which are marked with the adjoining pictogram.
1.17

Using lifting equipment

WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.
Check that the lifting and load suspension gear

they have sufficient load carrying

and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly. Never walk under suspended loads!
Safety
Version 1.1.3 - 2020-07-21 Translation of the original instructions
B34H | B34HV GB
79