Intended Use; Reasonably Foreseeable Misuse - Optimum OPTIdrill DM35 Betriebsanleitung

Only switch when stopped!
Wear safety shoes!
1.2

Intended use

WARNING!
If the magnetic drill is not used properly

there is a risk of personal injury,

the machine and other material property of the operating company will be endan-
gered,
the function of the magnetic drill may be affected.
The magnetic drill is intended to make precise holes in magnetisable materials, such as steel.
The magnetic drill can be used horizontally, vertically and overhead. Ensure that the holding
surface is even, at least corresponds to the base of the magnets and that the base is made of
magnetisable, clean material that is at least 10mm thick.
Continuous operation of the magnetic drill for more than 2 to 3 hours is not permitted.
The magnetic drill is designed and constructed for use in an environment that is not at risk of
explosion, within buildings or protected roofing. The use of the magnetic drill in an open envi-
ronment is not permitted.
The magnetic drill must only be used by persons who are qualified and familiar with handling it,
or are appropriately trained.
If the magnetic drill is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the magnetic drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you
observe the limits of the magnetic drill,

observe the operating manual.

1.3

Reasonably foreseeable misuse

Any use other than that specified under "Intended use" or any use beyond that described will be
deemed non-intended use and is not permissible. Any other use has to be discussed with the
manufacturer. In order to avoid misuse, it is necessary to read and understand the operating
instructions before first commissioning. Operators must be qualified.
Version 1.0.7 dated 2019-09-25
Pull out the mains plug!
DM35│DM35V│DM35PF│DM36VT│DM38VF│DM50│DM50V│DM50PM│DM60V│DM98V
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Wear protective glasses!
®
Wear protective gloves!
GB
Page 25