Intended Use - Optimum Optidrill B 24H Betriebsanleitung

1.2

Intended use

WARNING!
In the event of improper use of the drilling machine

will endanger personnel,

will endanger the machine and other material property of the operating company,
the correct function of the drilling machine may be affected.
The drilling machine is designed and manufactured to be used in a non-explosive environment.
The drilling machine is designed and manufactured for holes in cold metals or other non flam-
mable materials or that not constitute a health hazard using a rotating filing-stripping tool that
has a number of grooves for collecting the filings.
If the drilling machine is used in any way other than described above, modified without authori-
zation of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accor-
dance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that
observe the limits of the drilling machine,

the operating manual is observed,

the inspection and maintenance instructions are observed.


Technical specification on page 90
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling machine! They could endanger the personnel and cause damage to the drilling
machine.
WARNING!
The B24HV and B28HV drilling machine is not intended for use in residential facilities
where the power is supplied via a public low voltage supply system. In these areas, it
may be difficult to guarantee electromagnetic compatibility due to conducted and
emitted interference.
CAUTION!
If the drilling machine is not used as intended or if the safety directives or the operating
instructions are ignored the liability of the manufacturer for any damages to persons or
objects resulting hereof is excluded and the claim under guarantee is becoming null and
avoid!
Safety
Version 2.2.6 - 2020-07-21 Translation of the original instructions
B24H | B24HV | B28H | B28HV GB
79