Intended Use - Optimum Optidrill DX 13V Betriebsanleitung

Switching on forbidden!
Wear protective glasses!
1.3

Intended use

WARNING!
In the event of improper use of the drilling machine

will endanger personnel,

will endanger the machine and other material property of the operating company,
the correct function of the drilling machine may be affected.
The drilling machine is designed and manufactured to be used in a non-explosive environment.
The drilling machine is designed and manufactured for holes in cold metals or other non flam-
mable materials or that not constitute a health hazard using a rotating filing-stripping tool that
has a number of grooves for collecting the filings.
If the drilling machine is used in any way other than described above, modified without authori-
zation of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that

observe the limits of the drilling machine,

the operating manual is observed,

the inspection and maintenance instructions are observed.

Technical specification on page 44
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling machine! They could endanger the personnel and cause damage to the drilling
machine.
EN DX13V | DX15V
38
Use ear protection!
Wear protective gloves!
Originalbetriebsanleitung
Read the operating
instructions before
commissioning!
Wear safety shoes!
Pull out the mains plug!
Wear a protective suit!
Safety
Version 1.0.4 - 2021-08-30