Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.11
During work
The spindle sleeve is advanced by means of the star wheel. Make sure that the feed is constant
and not too fast.
The spindle sleeve is returned to its initial position by the return spring.
WARNING!
Seizing of clothes and / or hair.
Make sure to wear well-fitting work during drilling work.
Do not use gloves.
If necessary, use a hairnet.
CAUTION!
Danger of bumps from the levers on the star wheel.
Do not release the star wheel when repositioning the drilling spindle sleeve.
Pull back the drilling spindle sleeve by hand.
CAUTION!
Danger of crushing. Do not place your hand between the drilling head and the spindle
sleeve.
INFORMATION
The smaller the bit the more easily it may break.
In the case of deep drilling, remove the bit from time to time to remove filings from the drill. Add
a few drops of oil to reduce friction and prolong the service life of the bit.
Operation
Version 1.1.3 - 2020-07-21
Translation of the original instructions
B34H | B34HV
GB
107
Werbung
Inhaltsverzeichnis
Fehlerbehebung
