Other Pictograms; Intended Use - Optimum OPTIdrill B 40GSP Betriebsanleitung

1.2.2

Other pictograms

Warning of danger of
slipping!
Warning of automatic
start-up!
Activation forbidden!
Use protective glasses!
1.3

Intended use

WARNING!
In the event of improper use, the machine

will endanger personnel,

the machine and other material property of the operating company will be endan-
gered,

the correct function of the machine may be affected.
The geared drill is designed and manufactured for holes in cold metals or other non flammable
materials or that not constitute a health hazard using a rotating filing-stripping tool that has a
number of grooves for collecting the filings.
If the geared drill is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that

observe the limits of the geared drill,

the operating manual is observed,

the inspection and maintenance instructions are observed.

Technical data on page 68
EN B40 GSP
58
Warning risk of stumbling!
Warning tilting danger!
Use ear protection!
Use protective gloves!
Translation of original instruction
Warning hot surface!
Warning of suspended
loads!
Disconnect the mains plug!
Read the operating
instructions before
commissioning!
Use protective boots!
Warning biological hazard!
Caution, danger of
explosive substances!
Use protective suit!
Safety
Version 2.1.2 - 2021-09-22