Intended Use - Optimum OPTIdrill DH 35G Betriebsanleitung

Switching on forbidden!
Wear protective glasses!
Use ear protection!
1.3

Intended use

WARNING!
In the event of improper use of the geared drill
will endanger personnel,

will endanger the machine and other material property of the operating company,

the correct function of the geared drill may be affected.
The geared drill is designed and manufactured to be used in a non-explosive environment. The
geared drill is designed and manufactured for holes in cold metals or other non flammable
materials or that not constitute a health hazard using a rotating filing-stripping tool that has a
number of grooves for collecting the filings.
If the geared drill is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you
observe the limits of the geared drill,

the operating manual is observed,

and comply with the inspection and maintenance instructions.


Technical specification on page 69
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
geared drill! They could endanger the personnel and cause damage to the geared drill.
Safety
Version 1.0.4 - 2022-02-15
Do not climb onto the
machine!
Wear protective gloves!
Only switch during
standstill!
Translation of original instruction
Read the operating
instructions before
commissioning!
Wear safety shoes!
Protect the environment!
Pull out the mains plug!
Wear a protective suit!
Contact address
DH35G EN
59