Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interval
Where?
as required
as required
as required
Maintenance
Version 1.1.3 - 2020-07-21
What?
How?
If the light bulb is defective:
Disconnect the machine from the mains.
Unscrew the glass cover of the machine illumination.
Unscrew the light bulb by turning it to the left and by slightly
pressing the bulb into the socket (bayonet).
Replace the light bulb.
Screw the glass cover onto the machine illumination.
Img.7-5:
Machine illumination
ATTENTION!
Parts may fly off at high speed. When disassem-
bling the key housing, please make sure that the
machine is only maintained and prepared by quali-
fied staff.
Cooling pump:
The cooling pump is almost maintenance free. Replace the
cooling agent in regular intervals and adapted to the usage.
When using coolants which are leaving remnants it is
necessary to rinse the cooling pump.
Chip filter:
Clean the chip filter. To do so, unscrew the chip container
and remove the chips or other soiling.
Suck the old cooling agent off with a suitable industrial suc-
tion cup over the charging hole.
Fill in new coolant over the chip tray. The maximum
capacity of the coolant is about 4,5 litres.
Img.7-6:
Coolant pump / Chip filter B34HV
Translation of the original instructions
Machine illumination
Coolant pump
Chip filter
Filler hole
B34H | B34HV
GB
115
Werbung
Inhaltsverzeichnis
Fehlerbehebung
