Battery Charging Plug; Push-Button For Activation Of Engine Reverse Mode - Rotax Rm1 Benutzerhandbuch

2.3. Battery charging plug

Using the battery charging plug (pos.3) the battery can be re-charged while installed in the vehicle.

2.4. Push-button for activation of engine reverse mode

The push-button (pos. 2) for activation of engine reverse activates the electronic reverse mode and
can be used when
•
the vehicle is at standstill
•
the engine is idling
By actuating the push-button the engine changes its
rotation sense by a special control of the ignition.
The reverse gear can be activated at 1
or neutral.
To drive backwards however the 1
engaged.
When the reverse gear is activated, a signal LED
(pos. 1) flashes on the multi-functional display
and a warning tone sounds.
Attention: Please, read the warning hints
To change to forward drive, activate the push-button for
reverse gear again under the same conditions, and the
engine changes to forward drive, the warning tone stops.
This technology was developed by ROTAX for the Kart and applied for patent.
Seite/page 79/132
Downloaded from www.Manualslib.com
st
gear must be
regarding reverse gear on the
battery cover.
ROTAX KART RM1
manuals search engine
Operator`s Manual RM1
st nd
, 2 gear
Ausgabe/Edition 01/2006