Product Care; Environmental Conditions - Ossur Direct Socket TF Gebrauchsanweisung

PRODUCT CARE

Cleaning the Direct Socket
Use a damp cloth to clean the socket regularly. Clean regularly to prevent dirt and residues from building up and
affecting comfort or suspension.
Cleaning the Brim
Wash the brim regularly with mild soap and lukewarm water.
Keep the brim folded up when the socket is not in use.
Examine the Brim
Examine the brim regularly for damage and wear.
CAUTION: Any damage and wear can decrease the function of the brim. Immediately report damage and wear to
the prosthetist.

ENVIRONMENTAL CONDITIONS

Temperature
Temperature (Resin) Optimal: 25 °C (77 °F)
Humidity
COMPLIANCE
This component has been tested according to ISO 10328 standard to 3 million load cycles. Depending on the
amputee's activity this corresponds to a duration of use of 3 to 5 years. We recommend carrying out yearly safety
checks.
ISO - P -
Body mass limit not to be exceeded!
*)
For speci c conditions and limitations of use
see manufacturer's written instructions on
intended use!
DISPOSAL
All components of the product and packaging should be disposed of in accordance with respective national
environmental regulations. Users should contact their local governmental office for information on how these
items can be disposed of in an environmentally sound manner.
Use
0 °C (32 °F) to 40 °C (104 °F) 0 °C (32 °F) to 40 °C (104 °F)
Ambient relative humidity
between 10% to 95%
(non-condensing)
6 kg *)
Shipping
Resin: 15 °C (59 °F) to 25 °C (77 °F) 15 °C (59 °F) to 25 °C (77 °F)
Ambient relative humidity
between 10% to 95%
(non-condensing)
Storage
0 °C (32 °F) to 40 °C (104 °F)
Ambient relative humidity
between 10% to 95%
(non-condensing)
12