Programmed Play - Sanyo DC-007C Handbuch

Skip play
To skip to track 6 while track 3 is playing, press the e / c button
repeatedly until "6" appears in TR on the display. To skip back to track 3
while track 6 is playing, press the d / f button repeatedly until "3"
appears.
- The number button(s) on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press 6.
Search (forward/reverse)
If the e / c or d / f button is pressed during play, the changer will
search at high speed in the forward or reverse direction while the button
is being pressed. When the button is released, normal play will continue.
Selecting CD play mode
Press the DISC MODE button to select the desired play mode. Each time
the button is pressed, the play mode changes as follows.
TR-1: Play the first track of each CD.
1-DISC: Play all tracks on the selected CD.
NOR: Play all tracks on all CDs.
Note:
During programmed play, only "NOR" is selected.
Repeat play
(Remote control only)
Press the CD/MD REPEAT button before or during play. The changer will
play the tracks that are selected with the CD play mode (or all the
programmed tracks) repeatedly. "REPEAT" appears on the display. To
cancel repeat play, press the CD/MD REPEAT button again. "REPEAT"
disappears.
Random play
(Remote control only)
Press the RANDOM button to begin random play. The changer will
automatically select and play discs and tracks at random. "RANDOM"
appears on the display.
- Random play will not function during programmed play.
Changing CDs during play
While the changer is playing one CD, press one of the DISC SELECT
buttons to skip to another CD. "CH DISC" blinks briefly, then play starts
automatically from the first track on the selected CD.

PROGRAMMED PLAY

Up to 32 tracks, from up to 3 CDs, can be programmed for play in any
order.
- To begin the programming procedure, select "CD" function first.
- The discs or tracks must be programmed in the stop mode.
- The same disc or track can be programmed more than once.
Follow the example below to programme tracks 6 and 2 on DISC 1 and all
tracks on DISC 3.
1. Press the MEMORY button. "PROG." blinks.
2. Press the DISC SELECT button to select DISC 1.
1
2
PROG.
3
3. Press the e / c button to select track 6.
- The number button(s) can also be used (press 6).
1
TR
2
PROG.
3
4. Press the MEMORY button. "PROG." remains lit.
13
(Remote control only)
NOR
NOR
5. Press the d / f button to select track 2, then press the MEMORY.
6. Press the DISC SELECT button to select DISC 3, then press the
MEMORY.
1
2
PROG.
3
7. Press the CD a button to start programmed play.
1
TR
2
PROG.
3
When all programmed tracks have been played, the changer stops
automatically.
- The programme contents are retained in memory.
- The maximum number of tracks that can be programmed is 32. If you
try to enter more tracks, "FULL" appears on the display.
- If a non-existent disc or track number is programmed, that disc or track
will be skipped during play.
The programme is cleared when the n button is pressed in the stop
-
mode.
Checking the programme
Each time the MEMORY button is pressed in the stop mode, the
programmed details sequentially appear on the display.
Changing a programme
To add a new track to a programme:
1. In the stop mode, press the MEMORY button repeatedly until "- - - -
.- -" is displayed.
2. Select a CD and track as explained above.
3. Press the MEMORY button.
To change a track:
1. In the stop mode, press the MEMORY button repeatedly until the track
number to be replaced is displayed.
2. Select a CD and track as explained above.
3. Press the MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.
NOR
NOR