Scanning And Printing From Film; Operation Flowchart - Sony UPA-PC105 Benutzerhandbücher

2 Touch the number buttons to reenter the password
that you entered prior to printing.
To correct the entry clear it by touching the [C]
button and reenter the password.
3 Touch the [Enter] button.
All the print jobs are cancelled and the display
changes to the screen in Step 1 of "Output"
(page 16).
18
GB

Scanning and Printing from Film

Scanning and Printing
from Film
This section describes how to scan and print from film.
Notes
• A compatible film scanner (UP-S90/100) and printer
(UP-DR100, etc.) must be connected to the system to
scan and print from film.
For details, see the Operating Instructions.
• This operation can only be performed when the unit is
in Shop staff only mode.
For details about how to change the operation mode,
see "Changing the Operation Mode" (page 44).

Operation Flowchart

The following represents the normal flow of operations
to scan and print from films.
Selecting the Scanner as the Input Device
Selecting the Output Service
Entering the Job ID
Setting the Film and Prescanning
Selecting the Image for Output and Making the
Scanner Settings
Scanning the Film
Specifying the Number of Copies to Print
Confirming Prices and Output