Sony UPA-PC105 Benutzerhandbücher Seite 51

[CD Creation] button
Touch this button to open [Setting - Menu - CD
Creation] screen and make [CD Creation] related output
service settings.
• [ON/OFF] button
With this set [ON], [CD Creation] can be selected as
the output service on the output service selection
screen. Touch this button to toggle the setting [ON]
(selectable) or [OFF] (not selectable).
• [Limitation] button
Touch this button to open the screen where you can set
the upper limit for the number and size of the images
that can be written to a CD-R.
– [Max Pics] button
An upper limit can be set for the number of images
written to a CD-R. Touch this button to open the
screen where you can enter the upper limit for the
number of images (range: 1 to 9999).
– [Max Data Size] button
An upper limit can be set for the capacity of the
CD-R to store images. Touch this button to open the
screen where you can enter a the maximum disc
capacity for storing images (range: 1 to 700 MB).
• [Add Index] button
With this setting [ON], an index is printed while
image data is written to a CD-R. Press this button to
toggle the setting [ON] (print indexes with write) or
[OFF] (An index is not printed.).
Note
If you touch the [Add CD] button during the printing
operation and images are written to the CD-R, the
settings that you made here are not effective. In the
screen used to specify the number of copies to be
printed, you must touch the [Add Index Print] button
and specify the number of copies that you want.
[Shop staff only] button
Touch this button to open the [Setting - Menu - Shop
staff only] screen, and make the [Shop staff only] output
service settings.
• [ON/OFF] button
When this setting is [ON], [Shop staff only] output
service settings can be selected in the output service
selection screen. You can switch this setting [ON]
(settings selectable) or [OFF] (settings not selectable)
by touching this button.
• [Size] button
Touch to select the paper size for output with the
[Shop staff only] output service. Touch this button to
open the paper size selection screen, then touch the
[3.5 × 5], [4 × 6], [5 × 7] or [6 × 8] button and touch
the [OK] button.
• [Quantity] button
Touching this button opens a screen that allows you to
set the initial number of prints displayed when [Shop
staff only] is selected as the output service.
– [Default Qty] button
This button sets the default number of prints for the
[Shop staff only] output service. A screen for the
setting the default number appears when this button
is pressed. You can set a number between 0 and 10.
– [Max Qty] button
This button sets the maximum number of prints that
can be output at once with the [Shop staff only]
output service. A screen for setting the maximum
number of prints appears when this button is
pressed. You can set a number between 1 and 255.
– [Max Pics] button
Set the maximum number of prints that can be
specified for output for the [Shop staff only] output
service. Touch this button to open the screen and
enter a number for the maximum number of prints
that can be selected (range: 1 to 255).
51
GB
Settings