Sony UPA-PC105 Benutzerhandbücher Seite 17

Canceling Printing
This procedure varies depending on the settings made in
the configuration screen. Follow the procedure that
applies to your situation.
If the unit is set to allow other operations during
printing
1 Perform the procedures from Step 2 of "Output"
(page 16) to Step 1 of "Selecting the Scanner as
the Input Device" (page 13).
2 Touch the screen twice successively at the
location indicated below.
3 Touch the number buttons to reenter the password
that you entered prior to printing.
To correct the entry clear it by touching the [C]
button and reenter the password.
4 Touch the [Enter] button.
A screen allowing you to confirm the cancellation
is displayed.
5 Select the items that you want to cancel.
• If you touch the [Abort printing] button, only the
• If you touch the [Abort all jobs] button, all the
• If you touch the [Cancel], printing continues
If the unit is set to inhibit other operations during
printing
1 Touch the screen twice successively at the
Touch here twice.
current print job is cancelled.
print jobs are cancelled.
normally.
location indicated below.
Scanning Photographs and Printing
Touch here twice.
17
GB