Location And Function Of Parts; Main Unit - Sony CCMA-2DAR Gebrauchsanweisung

Location and Function of
Parts

Main unit

(DC input) Controller connector (round

type, 5-pin)
Connect to the supplied controller.
 Camera connector (C mount)
Connect to the MCC-1000MD camera head.
 Microscope connector
Connect to a microscope. If the microscope is
an M38 type, use the supplied M38 adapter
attachment.
 Iris adjustment ring
Adjusts the iris of the camera.
 Focus adjustment knob
Adjusts the focus of the camera.
Controller
 Adapter connector (round type, 5-pin)
Connect to the camera adapter.
 NEAR button
Moves the focus position to the NEAR side
while the button is pressed.
 FAR button
Moves the focus position to the FAR side while
the button is pressed.
Inserting the batteries
Open the cover on the rear side of the controller,
and insert two size AA (R6, LR6) batteries (not
supplied) with the + and – terminals aligned with
the  and  marks inside the battery
compartment.
Note
When replacing the batteries, always change both
at the same time. Do not use an old battery and a
new battery, and do not use different types of
battery, such as an alkaline battery and a
manganese battery.

Location and Function of Parts

5
GB