Operation; Operation Overview; Operation Modes - Sony UPA-PC105 Benutzerhandbücher

Operation

Operation Overview

Stored Image Data Sources
• "Memory Stick"
• CompactFlash card
• SmartMedia card
• SD card
• MultiMediaCard
• Floppy disk
• CD-ROM
Reading data
Selecting images to output
• Trimming
• Correcting colors • Selecting sepia or black and white • Annotating
These instructions describe general procedures for
capturing and printing image data according to the type
of original data used:
• Printing Image Data (page 6)
• Scanning Photographs and Printing (page 12)
• Scanning and Printing from Film (page 18)
Refer to the appropriate sections for details about how to
perform the procedures below after using one of the
general procedures above.
For details about how to edit images, see "Editing
Image Data" (page 26).
For details about how to write image data to a CD-R and
selecting other output services, see "Output Services"
(page 34).
Original Data
Pictures
Editing Images
• Rotating • Stamping dates
Output Services
Printing or writing to CD-R
Scanning
(in the Shop staff only mode)
Scanning
Selecting images to output
• Removing red eye
Note
You cannot edit images to be written
to CD-R.

Operation Modes

You can use the unit in two operation modes: the Customer
mode (allows customers and shop employees to perform
usual operations) and the Shop staff only mode (allows
employees to perform a number of special operations).
Scanning film and printing, printing photos of various
standard sizes, etc., are performed in the Shop staff only
mode. By default, the unit is in Customer mode. Switch to
the Shop staff only mode as necessary.
For details about how to change the operation mode, see
"Changing the Operation Mode" (page 44).
Film
5
Operation Overview
GB