Sony UPA-PC105 Benutzerhandbücher Seite 36

3
Touch [Border], touch the template that you want to
use, then touch the [OK] button in the lower-right
corner of the screen.
If the list contains more than one page, touch [b] or
[B] to change the page display.
Touch the type of template
Select the template that you want to use
4
Perform one of the following procedures:
• To print the image data that has been stored
Steps 1 to 2 of "Inserting the Media" (page 7)
• To scan the photograph and print
Steps 1 to 5 of "Loading the Originals in the
Scanner" (page 13)
• To scan the film and print
Step 1 of "The Job ID screen is displayed."
(page 19) through Step 6 of "Scanning the Film"
(page 22)
Note
In the descriptions for printing, substitute "Collage
Print" for "Print".
5
Touch the image to be combined for printing, then
touch the [OK] button in the lower-right corner of
the screen.
If all the images cannot be displayed, touch [b] or
[B] to display the previous or next page.
36
GB
Output Services
At this step, you can also perform the following
procedures:
• Touch the [Change the template] button to return
to the screen in Step 3 and select a different
template.
• When using data previously stored on media, the
[Load from another media] button appears on the
screen. Touch this button to load data stored on a
different media. Follow the instructions on the
screen to perform this operation.
The images and templates are displayed.
6
Specify the layout of the composite image.
1 To select the template of the composite image
touch the image in the screen and touch the
[Edit picture] button.
If all the images cannot be displayed, touch [b]
or [B] to display the previous or next page.
The layout specification screen appears.
2 If you selected [Layout with different pictures]
in Step 3, touch the layout that you want to use.
3 Touch the [Rotate] button to rotate the image
and template 90 degrees counterclockwise .
4 Under [Zoom] touch the [+] button to enlarge
the image.
• Touch the [+] button repeatedly to achieve the
desired size.
• To reduce the size of the image if it is too
large, touch the [-] button.