Sony UPA-PC105 Benutzerhandbücher Seite 52

[Index] button
Touch this button to display the [Setting - Menu - Index]
screen and make [Index] output service settings.
• [ON/OFF] button
When this setting is [ON], [Index] output service
settings can be selected in the output service selection
screen. You can switch this setting [ON] (settings
selectable) or [OFF] (settings not selectable) by
touching this button.
• [Size] button
Touch to select the paper size for output with the
[Index] output service. Touch this button to open the
paper size selection screen, then touch the [3.5 × 5] or
[4 × 6] button and touch the [OK] button.
• [Quantity] button
Touching this button opens a screen that allows you to
set the number of images that can be selected when
[Index] is used as the output service.
– [MaxQty] button
This button allows you to set the maximum number
of images that can be selected when using the
[Index] output service. A screen for setting the
maximum number of images appears when this
button is pressed. You can set a number between 1
and 9999.
• [Install Logo] button
You can change the logo printed on index sheets to
match your shop logo.
The image that you want to use for the logo must be
300 × 150 (W × H) pixels, and saved on a floppy disk
in bitmap file format under the file name "logo.bmp".
Touch the [InstallLogo] button to display the screen
where you can change the logo. Follow the on-screen
instructions to complete the procedure.
• [Date Stamp] button
Select the format in which the date is to be printed on
the index. For example:
52
GB
Settings
Format September 15, 2002
YYYYMMDD 2002/09/15
DDMMYYYY 15/09/2002
MMDDYYYY 09/15/2002
Touch this button to open the date format screen, touch
the date format you want to use, then touch the [OK]
button.
• [File name] button
When printing indexes, select the type of image title
that you want to use. Touch the this button, to switch
between [ON] (images are arranged by file name) or
[OFF] (images appear with consecutive numbers).
Note
If [File name] is [ON] when you scan film and then
write to CD-R, the frame numbers displayed on the
screen after prescanning appear on the index print.
However, the images are arranged by consecutive
numbers on the CD-R.
SETTING END
• Touch the [OK] button to temporarily save the settings
that you made. To confirm the settings, touch the [OK]
button repeatedly until the screen prompting you to
confirm whether you want to save the settings appears,
then touch the [OK] button to close the configuration
screen.
• Touch the [Cancel] button to ignore the modifications
that you made and restore the previous settings. If you
touch this button on the screen that appears
immediately after you touch one of the tabs, all the
settings that you have made on that tab are ignored,
and the screen returns to the password entry screen.