Changing The Settings; Changing The Operation Mode - Sony UPA-PC105 Benutzerhandbücher

Changing the Settings

Changing the Operation
Mode
Scanning film and printing, printing photos of various
standard sizes, etc., are performed in the Shop staff only
mode. By default, the unit is in Customer mode. When
necessary, change the operation mode as follows.
1
Touch the screen twice successively at the location
indicated below.
2
Touch the number buttons to enter the necessary
password to change the operation mode.
To correct the entry, clear it by touching the [C]
button and reenter the password.
Note
The default password is [2222].
44
GB

Changing the Operation Mode

3
Touch the [Enter] button in the lower-right corner
of the screen.
A message prompting you to confirm the change of
mode is displayed.
4
Read the contents of the message, then touch the
[OK] button.
The operation mode changes and the display
returns to the screen in Step 1.
Touch here twice.