Sony UPA-PC105 Benutzerhandbücher Seite 61

[Version Up] button
The main unit software can be updated with a newer
version. For more details about updating the software,
contact the store where you purchased the unit.
[Timeout] button
Touch this button to open the [Setting - Other - Timeout]
screen and set the time interval after which unit
automatically returns to the initial screen when it is idle.
• [Timeout 1 (sec)] button
Sets the time interval after which a message
prompting you to confirm whether you want to cancel
the operation appears when the unit is idle. Touch this
button to display the time input (seconds) screen. The
interval must be between 1 and 1800 seconds.
• [Timeout 2 (sec)] button
Sets the time interval after which the screen
automatically returns to the initial screen when the
message prompting you to confirm whether you want
to cancel an operation appears. Touch this button to
display the time input (seconds) screen. The interval
must be between 1 and 1800 seconds.
Note
This setting also applies when you display help. When
this time elapses, help disappears and the display
returns to the current screen.
SETTING END
• Touch the [OK] button to temporarily save the settings
that you made. To confirm the settings, touch the [OK]
button repeatedly until the screen prompting you to
confirm whether you want to save the settings appears,
then touch the [OK] button to close the configuration
screen.
• Touch the [Cancel] button to ignore the modifications
that you made and restore the previous settings. If you
touch this button on the screen that appears
immediately after you touch one of the tabs, all the
settings that you have made on that tab are ignored,
and the screen returns to the password entry screen.
61
GB
Settings