Location And Function Of Parts - Sony CBK-3610XS Bedienungsanleitung

Location and Function of Parts

1
2
3
4 6
a Camera body adapter
Adapter that attaches to the camera body to
extend the imager block.
b MONITOR IN connector (BNC type)
Connector that inputs the relayed monitor signal
to the imager block adapter.
c 24 V IN connector (Fischer 3-pin)
DC power supply input connector that supplies
the external power supply to the imager block
adapter.
d ASSIGN (assignable) button 3
Toggles the assigned function between on/off
(enable/disable) or activates the function with
each press.
5
7
For details about function assignment, refer to the
MPC-3610 Operating Instructions.
Note
You can also use the ASSIGN3 button on the imager
block when it is extended. However, the ASSIGN3 lamp
does not light.
e Extension cable
Extension cable for extending the imager block to
5.5 m (18 ft).
f Receiver
Receiver adapter that connects to the camera
body adapter.
g Repeater
Repeater that connects to the imager block
adapter receiver.
8
9
Location and Function of Parts
0
qa
qs
17