Sony UPA-PC105 Benutzerhandbücher Seite 24

Confirm Prices and Output
1
Confirm the prices, and then touch the [Confirm]
button.
If you touch the [Reset] button, the display returns
to the screen in Step 1 of "Specifying the Number
of Copies to Print" (page 23).
Also, if you touch the [Additional order] button, all
your operations up-to-date are saved, and the
display returns to Step 2 of "Selecting the Scanner
as the Input Device" (page 19). From there, you can
select a different output service and combine the
various prices when you are ready to print. (You can
perform this operation up to three times.)
The print job starts. If you selected several output
services, they are combined and output.
When all the data is printed, the following screen
appears.
24
GB
Scanning and Printing from Film
Notes
• If you use the configuration screen to set the unit
to inhibit all other operations during output, this
screen does not appear until all output is
complete.
• If you touched the [Add CD] button in Step 1 of
"Specifying the Number of Copies to Print"
(page 23), the following occurs (depending on
the settings made with the configuration screen).
– If the unit is set to allow other operations during
printing
When printing is complete, a message appears
prompting you to insert a CD-R. Perform Steps
7 to 9 of "Writing Image Data to a CD-R"
(page 40)
– If the unit is set to inhibit other operations
during printing
When the images to be written to CD-R are
printed, a message appears prompting you to
insert a CD-R. Perform Steps 7 to 9 of "Writing
Image Data to a CD-R" (page 40).
2
Touch the [End] button.
The display returns to the screen in Step 1 of
"Selecting the Scanner as the Input Device"
(page 19).
To continue operation, touch the [Continue] button.
The [Continue] button appears if the unit is set to
inhibit other operations during printing with the
configuration screen. If you touch this button, the
display returns to Step 2 of "Selecting Media
Where Image Data is Stored", and the [Previous]
button becomes available. You can also continue
using images that you printed with other output
services.
Note
A receipt is printed if a receipt printer is connected
to the unit and settings necessary for printing
receipts have been made with the configuration
screen. However, if you set the unit to print receipts
automatically with the configuration screen, this
button is not available. When output finishes, the
receipt is automatically printed.