Sony UPA-PC105 Benutzerhandbücher Seite 15

At this step you can also perform the following
procedures:
• You can edit the image by trimming it or
adjusting the brightness and contrast.
For details, see "Editing Image Data" (page 26).
• When the index print setting is enabled in the
configuration screen, you can specify whether or
not to print an index of the displayed images.
For details, see "Using Index Printing"
(page 38).
• You can select the finish of your pictures between
glossy, texture, and matte. Touch the [Surface]
button to switch between [Glossy], [Texure], or
[Matte].
• When you specify [Prints] as the output service,
you can touch the [Add CD] button to print and
write the images that you selected to CD-R.
2
Touch the [OK] button.
The next screen allows you to confirm the price of
the print job.
Confirming Prices, Entering Passwords
To print, you must enter a password. The default
password is "1111". At this point, you can also save your
operations up-to-date, use a different output service, and
perform all the output operations simultaneously when
you are done.
Note
You can use the configuration screen to determine
whether a password must be entered and to change
passwords.
For details, see "[Setting - Other] Screen" (page 58).
Information display
(Allows you to confirm the number
of prints and the total price of the
print job.)
1
Confirm the prices, and then touch the [Confirm]
button.
If you touch the [Reset] button, the display returns
to the screen in Step 1 of "Specifying the Number
of Copies to Print" (page 14).
Also, if you touch the [Additional order] button, all
your operations up-to-date are saved, and the
display returns to Step 2 of "Selecting the Scanner
as the Input Device" (page 13). From there, you can
select a different output service and combine the
various prices when you are ready to print. (You can
perform this operation up to three times.)
The following screen appears.
Note
If you used the configuration screen to set printing
without password entry at this step, the print job
starts without displaying this screen, and you can
proceed to Step 2 of "Output" (see below).
Scanning Photographs and Printing
15
GB