Settings; [Setting - H/W] Screen - Sony UPA-PC105 Benutzerhandbücher

Note
If you touch the [Start Over] button, a message
prompts you to confirm that you want to completely
cancel the current operation. If you touch the [OK]
button, the display returns to the screen in Step 2.
4
When you are finished, the following screen
prompts you to confirm whether you want to save
the settings.
Touch the [OK] button repeatedly.
5
Touch the [OK] button.
If you touch the [Cancel] button, all the changes are
cancelled and display returns to the password
setting screen.
The settings are saved, the software restarts, and
the display returns to the screen displayed
immediately after the system starts up (Step 1 of
"Selecting Media Where Image Data is Stored",
page 7).
46
GB

Settings

Settings
This section describes the settings possible with this unit
by describing each setting screen.

[Setting - H/W] Screen

When you touch the [H/W] tab, the following screen
opens where you can set the status of peripheral devices
connected to the main unit, the value for color correction
during printing, and whether slots or drives are enabled
or disabled.
[Printer] button
Touch to open the [Setting - H/W - Printer] screen.