• [3.5 × 5], [4 × 6], [5 × 7], [6 × 8], [8 × 10/8 × 12]
buttons
With these settings [ON], the print size can be selected
from the screen opened when [Other Size] is selected.
Touch this button to toggle the setting [ON] (printing
enabled) or [OFF] (printing disabled).
Note
The size selected by touching the [Size] button in the
[Setting - Menu - Print] screen cannot be switched ON
in this screen.
• [Quantity] button
Touch this button to open the screen and set the
number of prints when [Other Size] has been selected
as the output service.
– [Default Qty] button
Touch this button to open the default entry screen,
then enter a number for the default number of prints
to output with [Other Size] (range: 0 to 10).
– [Max Qty] button
Touch this button to open the maximum print entry
screen, then enter a number for the maximum
number of prints that can be output all at once with
[Other Size] (range: 1 to 255).
– [Max Pics] button
Touch this button to open the maximum image entry
screen, then enter a number for the maximum
number of images that can be selected for output
with [Other Size] (range: 1 to 255).
[Collage] button
Touch this button to open the [Setting - Menu - Collage]
screen to make the [Collage] output service settings.
• [ON/OFF] button
With this settings set [ON], [Collage] is selected for
the output service in the output service selection
screen. Touch this button to toggle the setting [ON]
(selectable) or [OFF] (not selectable).
50
GB
Settings
• [3.5 × 5], [4 × 6], [5 × 7], [6 × 8], [8 × 10/8 × 12]
buttons
[Collage] output settings can be made for each size.
Touch one of the buttons, [3.5 × 5], [4 × 6], [5 × 7],
[6 × 8], [8 × 10/8 × 12], to open the setting screen for
the selected size.
– [ON/OFF] button
When this setting is set [ON], the print size can be
selected from the screen displayed when [Collage]
is selected as the output service. Touch this button to
toggle the setting [ON] (collage enabled) or [OFF]
(collage disabled).
– [Delete] button
Touch this button to display the screen where you
can delete collage print templates.
Touch the button of the template to select it, and then
touch the [OK] button. If you want to clear the
selection, touch the template button again.
Notes
• If you delete a preinstalled system template, you
cannot restore the template.
• When you touch the [Delete] button, seven
templates are displayed on the screen. If you do
not see the template that you want to delete, touch
the [More] button to go to the next screen.
• When you touch the [8 × 10/8 × 12] button, the
template set for the [Size] button in the [Setting -
H/W - Printer - UP-D70A] screen is deleted.
• [Quantity] button
Touch this button to open the screen where you can
select the number of output prints when [Collage] is
selected as the output service.
– [Default Qty] button
Touch this button to open the default value entry
screen and enter the number of prints output for
[Collage] (range: 0 to 10).
– [Max Qty] button
Touch this button to open the screen where you can
enter the upper limit for the number of prints to
output for [Collage] (range: 1 to 255).
– [Max Pics] button
Sets the maximum number of images that can be
specified for output for the [Collage] output service.
Touch this button to open the screen and enter a
number for the maximum number of images that can
be selected (range: 1 to 255).
• [Install] button
Touch this button to display the screen where you can
add collage print templates. For more details about
how to perform this operation, contact your dealer.