– DESCRIPTION
III
3.1 PHYSICAL DESCRIPTION
Electronic
Control Console (Fig. 1 – 1)
Micromotor
and cord (Fig. 1 – 2)
Variable-Speed footswitch (Fig. 4)
Motor Holder (Fig. 1 – 4)
Bracket (Fig. 1 – 5)
Peristaltic
irrigation line (Fig. 1 – 6)
Power
Cord
with external transformer (Fig. 1 – 7)
Note: All accessories are supplied non-sterile
3.2 TECHNICAL DESCRIPTION
a. LCD screen/control Keypad
The I- S
™ is adjusted by applying reasonable pressure to the keypad buttons.
URGE
Motor ON/OFF (Fig. 2 – 1)
Pump ON/OFF (Fig. 2 – 2)
Pump flow adjustment (Fig. 2 – 3)
Storage and quick access up to 5 different "Programs" (implant configurations) (Fig. 2 – 4)
Speed Increase/Decrease (Fig. 2 – 5)
Torque
adjustment
Handpiece
ratio selector (Fig. 2 – 7)
Forward/Reverse Selector (Fig. 2 – 8)
Handpiece
calibration (Fig. 2 – 9)
Motor
connector
Footswitch connector
Information required by the user is displayed on the LCD screen.
b. Control unit back panel
Irrigation
pump system (Fig. 3 – 1)
DC
power
supply plug in (Fig. 3 – 2)
Main
Power
On/Off Switch (Fig. 3 – 3)
Fuse
holder
(Fig. 3 – 4)
c. Control footswitch
Switching the coolant pump flow (Fig. 4a – 1)
Switching Programs (Fig. 4a – 2)
Clockwise/Anticlockwise running (Fig. 4a – 3)
Smooth
variation
Arch
(Fig. 4a – 5)
(Fig. 2 – 6)
(Fig. 2 – 10)
(Fig. 2 – 11)
of the speed up to the pre-selected maximum (Fig. 4a – 4) and (Fig. 4b)
9