Description; Physical Description - Acteon Piezotome Solo Benutzerhandbuch

- Do not apply excessive pressure to the screen.
Environment:
- Do not cover the device or obstruct the air inlets.
- Do not immerse and do not use outside.
- Do not tilt the device at an angle of more than 5°.
- Do not place the device near a heat source.
- Make sure that the cables do not prevent people from moving about freely.
- The device shall be stored in its original packaging, in a suitable place, which does not present a hazard for
people.
- The device is not designed to operate in the presence of anaesthetic gases or any other flammable gas.
- Do not expose the device to water mist or spray.
- Any condensation inside an electrical device is potentially dangerous.
- If the device is to be moved from a cold environment to a hot one, it must not be used until it has reached
room temperature.
- The device is not designed to operate in the vicinity of ionizing radiation.
- Do not insert metal objects into the device to prevent any risk of electric shock, short-circuit or the emission
of hazardous substances.
Servicing:
- Before and after each use, it is vital that you disinfect your device using products recommended by SATELEC.
- Prior to each intervention, it is imperative that you use clean, disinfected and sterilized accessories.
Accessories:
- The device may only be fitted with accessories designed or recommended by SATELEC that are perfectly suited
to the purpose.
- Use of accessories from other manufacturers is a potential hazard for you or your patients.
Repair:
- Warning: Do not repair or modify the device without the prior authorization of SATELEC.
- Warning: If the device is modified or repaired, specific inspections and checks shall be performed to ensure
that the device can still be used safely.
- In the event of an anomaly, contact the supplier of your device. Do not contact any other repairer who could
render your device hazardous for you and your patients.
In the event of doubt, contact an approved dealer or the Customer service department:
- www.acteongroup.com
- E-mail: satelec@acteongroup.com.
III – DESCRIPTION

3. 1 PHYSICAL DESCRIPTION

The device comprises 5 main parts:
- A console (Fig. 1, item 1).
- A multifunction pedal (Fig. 4).
- A PIEZOTOME SOLO handpiece and cable (Fig. 1, item 2).
- An bracket for irrigating solution (Fig. 1, item 3).
- A mains power cable with ground (Fig. 1, item 4).
The top of the console incorporates:
- An LCD (Liquid Cristal Display) screen displaying different information (Fig. 1, item 5).
- A control keyboard enabling you to change the settings of your device (Fig. 1, item 6).
The front face incorporates the handpiece cable connector (Fig. 1, item 7).
The right side face incorporates the pump housing (Fig. 1, item 8).
The back of the box incorporates the following elements:
- 1 mains connector with an earthing pin (Fig. 2, item 1).
- 1 pedal connector (Fig. 2, item 2).
- 1 fan (Fig. 2, item 3).
- 1 bracket support (Fig. 2, item 4).
Piezotome Solo V6 V2 5