Description Of The Connection Boxes; Footswitch - Acteon SOPRO 617 Betriebsanleitung

E N G L I S H
8

DESCRIPTION OF THE CONNECTION BOXES

8.1. DOCK M_USB2 OR DOCK M_VIDEO POWER SUPPLY
The dental camera power supply is connected to the power outlet. The other end of the cord is connected to
the dock where the symbol 6V is located (PHIHONG, PSA 10R-060 or FRIWO Model, MPP15 FW 7555M/06
model). The power supply automatically adapts to the electric networks 110 V ~ - 230 V ~ ; 50 Hz - 60 Hz; 0.5 A.
The camera voltage is powered by 6V of a continuous low voltage type (1.67 A).
8.2. DOCK MU_USB2 OR MU_VIDEO POWER SUPPLY
The electrical connection of this connection box should be performed by the installer. The dental camera
electrical supply is realized through the connection box that should be connected 24 V ~ 50 Hz - 60 Hz; 10 VA.
8.3. DOCK USB2 POWER SUPPLY
The dental camera electrical supply is directly performed through the computer USB port. The voltage powering
the camera is of continuous 5 V low voltage type (0.5 A).
8.4. VIDEO AND USB OUTPUTS
This camera has two independent video outputs - a composite one and a Y/C "S-Video".
One of these two outputs must be connected to the monitor video input (preferably Y/C "S-Video"). This camera
has a digital USB 2.0 output that can be connected to the USB port2 of a computer.

8.5. FOOTSWITCH

The footswitch should be connected here .if you have selected it to freeze the image (only available
on DOCK M_USB2 and DOCK M_VIDEO). For DOCK MU_USB2, DOCK MU_VIDEO, please refer to the product
integration instructions.
16
S o p r o 6 1 7 • U s e r m a n u a l