General Description; Front View; Rear View; Installation/Start Up - Acteon QUAZ Benutzerhandbuch

2. GENERAL DESCRIPTION

2.1 FRONT VIEW

2.3 REAR VIEW

3. INSTALLATION / START UP
3.1. INSTALLATION
IMPORTANT:
Do not tip the machine when installing it, it may get damaged inside. Always keep it in
vertical position.
WARNING:
• The door will be blocked until the autoclave is connected to the power supply.
• The machine has a slight inclination at the back to facilitate the draining of the
sterilisation vessel. In case the surface where it is installed is not levelled, this
inclination should be maintained by adjusting the front legs.
2.2 FRONT VIEW OPEN DOOR
17 l
Pos. 2 Pos. 1
• Always keep the door closed when moving the machine, do not use it as a support.
• Do not put pressure on the edge of the door while it is open (especially when the front
legs are in the second position).
24 l
Pos. 3 Pos. 2 Pos. 1