orbit controls OCM160 Betriebsanleitung Seite 74

Orbit Controls AG
Description:
This command will restart communication interface. It will take several seconds. During
this period device will not respond to any commands. Restart is needed for all LAN
setting changes.
Parameters:
None
Remarks:
Overlapped command
Example:
SYST:COMM:REST
:SYSTem:COMMunicate:SERial:BAUD
Syntax:
:SYSTem:COMMunicate:SERial:BAUD <CPD>
:SYSTem:COMMunicate:SERial:BAUD?
Description:
This command allows changing RS232 transfer rate.
Parameters:
<CPD>
·1200
·2400
·4800
·9600
·19200
·38400
·57600
·115200
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:SER:BAUD 9600
SYST:COMM:SER:BAUD? Response: 9600
:SYSTem:DATE
Syntax:
:SYSTem:DATE <DNPD>,<DNPD>,<DNPD>
:SYSTem:DATE?
Description:
This commands allows to change system device date.
Parameters:
<DNPD>
<DNPD>
<DNPD>
Remarks:
Overlapped command
Example:
SYST:DATE 2012,12,31
SYST:DATE? Response: 2012,12,31
:SYSTem:ERRor[:NEXT]?
Syntax:
:SYSTem:ERRor[:NEXT]?
Owner's Manual
{1200|2400|4800|9600|19200|38400|57600|115200} (default 9600)
1200 Bd
2400 Bd
4800 Bd
9600 Bd
19200 Bd
38400 Bd
57600 Bd
115200 Bd
Year, Range 2000 ... 2063
Month, Range 1 ... 12
Day, Range 1 ... 31
OCM160 Precision DC Calibrator
74