orbit controls OCM160 Betriebsanleitung Seite 57

OCM160 Precision DC Calibrator
·PT3916
·PT3926
·USER
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
RTD:STAN PT385A
RTD:STAN? Response: PT385A
[:SOURce]:RTD:COEFficient
Syntax:
[:SOURce]:RTD:COEFficient <DNPD>,<DNPD>,<DNPD>
[:SOURce]:RTD:COEFficient?
Description:
This command allows to define Coefficients (A, B, C) used for "User" Platinum standard
scale. Node SOUR:RTD also selects RTD function if not already selected.
Parameters:
<DNPD>
<DNPD>
<DNPD>
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
RTD:COEF 3.9083E-3,-5.775E-7,-4.18301E-12
RTD:COEF? Response: 3.908300E-03,-5.775000E-07,-4.183010E-12
[:SOURce]:TCPL[:AMPLitude]
Syntax:
[:SOURce]:TCPL[:AMPLitude] <DNPD>[<UNIT>]
[:SOURce]:TCPL[:AMPLitude]?
Description:
This command sets temperature in TC function. Node SOUR:TCPL also selects TC
function if not already selected. If unit parameter is part of temperature, new unit is set.
Parameters:
<DNPD>
<UNIT>
·CEL
·FAR
·K
Remarks:
The value is set to default after power on
The value is set to default on *RST command
Overlapped command
Example:
TCPL 100.0
TCPL? Response: 1.000000E+02 CEL
57
Pt3916 standard
Pt3926 standard
User (see RTD:COEF command)
Range 3e-3 ... 5e-3 (default 3.9083E-3)
Range -7e-7 ... -5e-7 (default -5.775E-7)
Range -5e-12 ... -3e-12 (default -4.18301E-12)
TC function. Default value is 100.0 °C.
{CEL|FAR|K}
degrees of Celsius
degrees of Fahrenheit
Kelvin
Orbit Controls AG
Owner's Manual