orbit controls OCM160 Betriebsanleitung Seite 72

Orbit Controls AG
:SYSTem:COMMunicate:LAN:ADDRess
Syntax:
:SYSTem:COMMunicate:LAN:ADDRess <CPD>
:SYSTem:COMMunicate:LAN:ADDRess?
Description:
This command allows to change IP address if DHCP is switched off. Interface must be
restarted to take effect (see SYST:COMM:REST command).
Parameters:
<CPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:ADDR 192.168.001.100
SYST:COMM:LAN:ADDR? Response: 192.168.001.100
:SYSTem:COMMunicate:LAN:MASK
Syntax:
:SYSTem:COMMunicate:LAN:MASK <CPD>
:SYSTem:COMMunicate:LAN:MASK?
Description:
This command allows to change subnet mask if DHCP is switched off. Interface must be
restarted to take effect (see SYST:COMM:REST command).
Parameters:
<CPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:MASK 255.255.255.000
SYST:COMM:LAN:MASK? Response: 255.255.255.000
:SYSTem:COMMunicate:LAN:GATE
Syntax:
:SYSTem:COMMunicate:LAN:GATE <CPD>
:SYSTem:COMMunicate:LAN:GATE?
Description:
This command allows to change default gateway if DHCP is switched off. Interface must
be restarted to take effect (see SYST:COMM:REST command).
Parameters:
<CPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:GATE 255.255.255.255
SYST:COMM:LAN:GATE? Response: 255.255.255.255
:SYSTem:COMMunicate:LAN:PORT
Syntax:
:SYSTem:COMMunicate:LAN:PORT <DNPD>
:SYSTem:COMMunicate:LAN:PORT?
Owner's Manual
Range 000.000.000.000
192.168.001.100)
Range 000.000.000.000
255.255.255.000)
Range 000.000.000.000 ... 255.255.255.255 (default 255.255.255.255)
OCM160 Precision DC Calibrator
... 255.255.255.255
... 255.255.255.255
(default
(default
72