orbit controls OCM160 Betriebsanleitung Seite 48

Orbit Controls AG
Overlapped command
Example:
CAL:SEC:EXIT
:CALibration:SECure:PASSword
Syntax:
:CALibration:SECure:PASSword <DNPD>
:CALibration:SECure:PASSword?
Description:
This command validates entered password and enables calibration access if verification
is successful. Access is invalidated after reset or if CAL:SEC:EXIT command is issued.
Calibration password can be changed from decade system menu MENU->Calibration-
>Password.
Parameters:
Range 0 ... 4294967295 (default 0)
Remarks:
The value is set to default after power on
The value is set to default on *RST command
Overlapped command
Example:
CAL:SEC:PASS 0
:DISPlay:ANNotation:CLOCk:DATE:FORMat
Syntax:
:DISPlay:ANNotation:CLOCk:DATE:FORMat <CPD>
:DISPlay:ANNotation:CLOCk:DATE:FORMat?
Description:
This command selects format of date displayed on device screen.
Parameters:
<CPD>
·MDYS M/D/Y format (M-month, D-day, Y-year)
·MDYA M-D-Y format
·DMYS D/M/Y format
·DMYO D.M.Y format
·DMYA D-M-Y format
·YMDS Y/M/D format
·YMDO Y.M.D format
Remarks:
Overlapped command
Example:
DISP:ANN:CLOC:DATE:FORM MDYS
DISP:ANN:CLOC:DATE:FORM? Response: MDYS
:DISPlay:ANNotation:CLOCk[:STATe]
Syntax:
:DISPlay:ANNotation:CLOCk[:STATe] <BOOL>
:DISPlay:ANNotation:CLOCk[:STATe]?
Description:
This command enables/disables showing actual time in title on device screen.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Owner's Manual
{MDYS|MDYA|DMYS|DMYO|DMYA|YMDS|YMDO} (default MDYS)
{ON|OFF|1|0} (default 1)
actual time is shown
actual time is hidden
same as ON
same as OFF
OCM160 Precision DC Calibrator
48