orbit controls OCM160 Betriebsanleitung Seite 56

Orbit Controls AG
Example:
RTD 100.0
RTD? Response: 1.000000E+02 CEL
[:SOURce]:RTD:TYPE
Syntax:
[:SOURce]:RTD:TYPE <CPD>
[:SOURce]:RTD:TYPE?
Description:
This command selects RTD type in RTD function. Node SOUR:RTD also selects RTD
function if not already selected.
Parameters:
<CPD>
·PLATinum
·NICKel
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
RTD:TYPE PLAT
RTD:TYPE? Response: PLAT
[:SOURce]:RTD:ZRESistance
Syntax:
[:SOURce]:RTD:ZRESistance <DNPD>[<UNIT>]
[:SOURce]:RTD:ZRESistance?
Description:
This command sets resistance at 0 °C for Platinum function. Node SOUR:RTD also
selects RTD function if not already selected.
Parameters:
<DNPD>
<UNIT>
·OHM
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
RTD:ZRES 100.0
RTD:ZRES? Response: 1.000000E+02 OHM
[:SOURce]:RTD:STANdard
Syntax:
[:SOURce]:RTD:STANdard <CPD>
[:SOURce]:RTD:STANdard?
Description:
This command selects Platinum temperature standard. Node SOUR:RTD also selects
RTD function if not already selected.
Parameters:
<CPD>
·PT385A
·PT385B
Owner's Manual
{PLATinum|NICKel} (default PLAT)
Range 100.0 ... 1000.0 (default 100.0)
{OHM}
{PT385A|PT385B|PT3916|PT3926|USER} (default PT385A)
Pt385 (68) standard
Pt385 (90) standard
OCM160 Precision DC Calibrator
56