orbit controls OCM160 Betriebsanleitung Seite 49

OCM160 Precision DC Calibrator
Remarks:
Overlapped command
Example:
DISP:ANN:CLOC ON
DISP:ANN:CLOC? Response: 1
:DISPlay:ANNotation:TOOLtip[:STATe]
Syntax:
:DISPlay:ANNotation:TOOLtip[:STATe] <BOOL>
:DISPlay:ANNotation:TOOLtip[:STATe]?
Description:
This command enables/disables showing tooltip in top on device screen.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
Overlapped command
Example:
DISP:ANN:TOOL ON
DISP:ANN:TOOL? Response: 1
:DISPlay:METer[:STATe]
Syntax:
:DISPlay:METer[:STATe] <BOOL>
:DISPlay:METer[:STATe]?
Description:
This command enables/disables showing meter in bottom on device screen.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
DISP:MET ON
DISP:MET? Response: 1
:DISPlay:BRIGhtness
Syntax:
:DISPlay:BRIGhtness <DNPD>
:DISPlay:BRIGhtness?
Description:
This command sets brightness of device display.
Parameters:
<DNPD>
Remarks:
Overlapped command
49
{ON|OFF|1|0} (default 1)
tooltip is shown
tooltip is hidden
same as ON
same as OFF
{ON|OFF|1|0} (default 0)
meter is shown
meter is hidden
same as ON
same as OFF
Range 0.0 ... 1.0 (default 1.0), 0.0 – Min, 1.0 – Max brightness
Orbit Controls AG
Owner's Manual