orbit controls OCM160 Betriebsanleitung Seite 60

Orbit Controls AG
Parameters:
<CPD>
·PT385A
·PT385B
·PT3916
·PT3926
·USER
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
TCPL:RJEX:PTST PT385A
TCPL:RJEX:PTST? Response: PT385A
[:SOURce]:TCPL:RJEXtern:COEFficient
Syntax:
[:SOURce]:TCPL:RJEXtern:COEFficient <DNPD>,<DNPD>,<DNPD>
[:SOURce]:TCPL:RJEXtern:COEFficient?
Description:
This command allows to define Coefficients (A, B, C) used for "User" Platinum standard
reference junction scale. Node SOUR:TCPL also selects TC function if not already
selected.
Parameters:
<DNPD>
<DNPD>
<DNPD>
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
TCPL:RJEX:COEF 3.9083E-3,-5.775E-7,-4.18301E-12
TCPL:RJEX:COEF? Response: 3.908300E-03,-5.775000E-07,-4.183010E-12
[:SOURce]:FREQuency[:AMPLitude]
Syntax:
[:SOURce]:FREQuency[:AMPLitude] <DNPD>[<UNIT>]
[:SOURce]:FREQuency[:AMPLitude]?
Description:
This command sets frequency (periond) amplitude in Frequency function. Node
SOUR:FREQ also selects Frequency function if not already selected.
Parameters:
<DNPD>
<UNIT>
·HZ
Remarks:
The value is stored in each preset
The value is set according to "Startup" preset after power on
The value is set to default on *RST command
Overlapped command
Example:
FREQ 1000.0
Owner's Manual
{PT385A|PT385B|PT3916|PT3926|USER} (default PT385A)
Pt385 (68) standard
Pt385 (90) standard
Pt3916 standard
Pt3926 standard
User (see RTD:COEF command)
Range 3e-3 ... 5e-3 (default 3.9083E-3)
Range -7e-7 ... -5e-7 (default -5.775E-7)
Range -5e-12 ... -3e-12 (default -4.18301E-12)
Range 1E-2 ... 15E3 (default 1000.0)
{HZ}
Hertz
FREQ? Response: 1.000000E+03 HZ
OCM160 Precision DC Calibrator
60