orbit controls OCM160 Betriebsanleitung Seite 43

OCM160 Precision DC Calibrator
*RST
Syntax:
*RST
Description:
This command resets the device to its initial status.
Parameters:
None
Remarks:
Sequential command
Example:
*RST
*TST?
Syntax:
*TST?
Description:
This command launches internal self-test and returns result.
Parameters:
<DNPD>
Remarks:
Sequential command
Example:
*TST? Response: 0
*STB?
Syntax:
*STB?
Description:
This query returns content of register STB, which carries the MSS bit status.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example:
*STB? Response: 0
*SRE
Syntax:
*SRE
*SRE?
Description:
This command allows set condition of the Service Request Enable register. Since bit 6 is
not used, the maximum value is 191.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example:
*SRE 2
*SRE? Response: 2
43
0 – test passed, 1 – test failed
Status byte register, Range 0 ... 255
Service Request Enable register
Orbit Controls AG
Owner's Manual