Siemens SITRANS LUT400 Betriebsanleitung Seite 5

SITRANS LUT400
WARNING: SITRANS LUT400 is to be used only in the manner outlined in this
manual, otherwise protection provided by the equipment may be impaired.
Note: This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based communications.
The Siemens SITRANS LUT400 series controllers are compact, single point, long-range
ultrasonic controllers for continuous level measurement of liquids, slurries, and solids, and
high accuracy monitoring of open channel flow. The series is compatible with Siemens full line
®
of EchoMax Transducers, allowing an operating range of 0.3 to 60 meters (dependent on
transducer).
SITRANS LUT400 has been coupled with a backlit Local User Interface (LUI) display featuring
menu driven programming. It boasts an intuitive web-based interface, and a host of wizards for
plug and play performance.
SITRANS LUT400 supports HART communication protocol, and several software packages for
remote communications [SIMATIC PDM, AMS Device Manager, Field Communicator 
375/475, and Field Device Tools (FDTs)]. It also features our next generation of Sonic
®
Intelligence , further strengthening our industry leading measurement performance while
improving ease of use.
Specifications
For a complete listing, see the SITRANS LUT400 (HART) Operating Instructions.
Power
AC Version

• 100-230 V AC
• Fuse: 5 x 20 mm, Slow Blow, 0.25A, 250V
1)
Power consumption is listed at maximum.
Environmental Conditions
Altitude
• 2000 m max.
Pollution degree
• 4
Approvals
Notes:
• The device label lists the approvals that apply to your device.
• Use appropriate conduit seals to maintain IP or NEMA rating.
• General
• Hazardous
Non-incendive (Canada)
Dust Ignition Proof
(International/Europe)
7ML19985XU81
15%, 50 / 60 Hz, 36 VA (10W)
Ambient Temperature
• -20 to +50 °C (-4 to +122 °F)
Relative humidity
• Suitable for outdoors
(only with IP65 / Type 4X / NEMA 4X Enclosure)
SITRANS LUT400 (HART)
DC Version
1)
• 10-32 V DC, 10W
• Fuse: 5 x 20 mm, Slow Blow, 1.6A,
125V
Installation category
• II
CSA , CE, FM, UL listed, C-TICK
US/C
CSA Class I, Div. 2, Groups A, B, C, D; Class II,
Div 2, Groups F, G; Class III
ATEX II 3D
Ex tc IIIC T70 °C IP65
IECEx SIR 12.0057X
SIRA 12ATEX9143X
1
Page EN-3