Siemens SITRANS LUT400 Betriebsanleitung Seite 30

PMD selected (cont' d )
Round Pipe
Palmer Bowlus Flume
H-Flume
Maximum Head
The maximum level value associated with the PMD.
Value
Zero Head Offset
The difference (positive or negative) between Low Calibration Point and zero head
(level at zero flow).
Value
Flowrate Units
The volume units used to display total flow.
Options
* If USER DEFINED option selected, the value must be set after completing the
wizard. See parameter
Maximum Flow at 20 mA
The maximum flowrate.
Value
Flowrate Decimal
The maximum number of decimal units to be displayed.
Options
Low Flow Cutoff
Eliminates totalizer activity for head levels at or below the cutoff value.
Value
Page EN-28
Wizard dimension name (parameter menu reference)
PIPE INSIDE DIAMETER D (
MAXIMUM FLUME WIDTH HMAX (
MAXIMUM LISTED HEAD HMAX (
Range: 0.000 to 60.000
Default: 60.000
Range: -60.000 to 60.000
Default: 0.000
L/S, L/MIN, CUFT/S, CUFT/D, GAL/MIN, GAL/D, IMPGAL/MIN, IMPGAL/D,
CUM/H, CUM/D, USER DEFINED *
Default: L/S
2.6.6.User Defined Unit
Range: -999 to 9999999
Default: 100
NO DIGITS, 1 DIGIT, 2 DIGITS, 3 DIGITS
Default: NO DIGITS
Range: 0.000 to 60.000
Default: 0.000
SITRANS LUT400 (HART)
2. 1 5.4.5. OCM Dimension 1
2. 1 5.4.5. OCM Dimension 1
2. 1 5.4.5. OCM Dimension 1
in full Operating Instructions.
)
)
)
7ML19985XU81