Siemens SITRANS LUT400 Betriebsanleitung Seite 38

2. Non-incendive wiring (Canada)
SITRANS LUT420
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 100 – 230V ± 15%
50/60 Hz, 36 VA (10 W)
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per Drawing A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
SITRANS LUT420
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 10 – 32V , 10W
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per DWG. A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
CSA Class I, Div 2 connection drawing number A5E03936871 can be downloaded from the
product page of our website at www.siemens.com/sitransLUT400.
Instructions specific to hazardous area installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number
SIRA 12ATEX9143X:
1) For use and assembly, refer to the main instructions.
2) The equipment is certified for use as Category 3D equipment.
3) The equipment may be used in hazardous zone 22.
4) This equipment has a maximum surface temperature of T70 °C (in a +50 °C ambient).
Refer to the applicable Code Of Practice for selection of this equipment with respect to
specific dust ignition temperatures.
5) The equipment is certified for use in an ambient temperature range of -20 to +50 °C.
6) Any cable or conduit entries must meet the requirements of European Directive 94/9/EC
for Group II, Category 3D and maintain the overall IP rating of the enclosure.
7) Cable should be selected in accordance with the applicable Code of Practice and such
that its insulation can withstand the maximum surface temperature of the enclosure
(T70 °C).
8) The equipment has not been assessed as a safety related device (as referred to by
Directive 94/9/EC Annex II, clause 1.5).
9) Installation and inspection of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable code of practice (EN 60079-14 and EN 60079-
17 in Europe).
10) Repair of this equipment shall be carried out by suitably trained personnel in accordance
with the applicable code of practice (e.g. EN 60079-19 within Europe).
Page EN-36
SITRANS LUT430
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 100 – 230V ± 15%
50/60 Hz, 36 VA (10 W)
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per Drawing A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
SITRANS LUT430
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 10 – 32V , 10W
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per DWG. A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
SITRANS LUT400 (HART)
SITRANS LUT440
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 100 – 230V ± 15%
50/60 Hz, 36 VA (10 W)
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per Drawing A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
SITRANS LUT440
7MLxxxx-xxxxx-xxxx
Serial No.: GYZ / B1034567
Power Rating: 10 – 32V , 10W
Contact Rating: 1A/5A @ 250V , Non-Inductive
Operating Temperature: – 20°C to 50°C
Enclosure:
IP65 / TYPE 4X / NEMA 4X
Class I, Div.2, Gr. A, B, C & D T3C
Class II, Div. 2, Gr. F & G
Class III
159134
Per DWG. A5E03936871
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
7ML19985XU81