All Rights Reserved; Disclaimer Of Liability; Technical Support - Siemens SITRANS LUT400 Betriebsanleitung

SITRANS LUT400 (HART) Quick Start Manual
This manual outlines the essential features and functions of the SITRANS LUT400 (HART
We strongly advise you to acquire the detailed version of the manual so you can use your
device to its fullest potential. The complete SITRANS LUT400 (HART) Operating Instructions, as
well as the Communications for SITRANS LUT400 (HART) Manual, can be downloaded from
the product page of our web site at: www.siemens.com/sitransLUT400. The printed manual is
available from your local Siemens representative.
Questions about the contents of this manual can be directed to:
Siemens AG
Siemens Milltronics Process Instruments
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com
Copyright Siemens AG 2012.

All Rights Reserved

We encourage users to purchase autho-
rized bound manuals, or to view elec-
tronic versions as designed and
authored by Siemens Milltronics Process
Instruments. Siemens Milltronics Pro-
cess Instruments will not be responsible
for the contents of partial or whole
reproductions of either bound or elec-
tronic versions.
MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments.

Technical Support

Support is available 24 hours a day.
To find your local Siemens Automation Office address, phone number, and fax number, go to:
www.siemens.com/automation/partner:
• Click on the tab Contact to find your product group (for example: Automation Technology).
• Click again on the product group drop-down box to navigate to the product family.
For Level: +Automation Technology > +Sensor Systems >+Process Instrumentation >
+Level Measurement > +Continuous. Select Ultrasonic.
For Flow: +Automation Technology > +Sensor Systems >+Process Instrumentation >
+Flow Measurement. Select Ultrasonic.
• Select the country followed by the City/Region.
• Select Technical Support under Service.
For on-line technical support go to: www.siemens.com/automation/support-request
• Enter the device name (SITRANS LUT400) or order number, then click on Search, and
select the appropriate product type. Click on Next.
• Enter a keyword describing your issue. Then either browse the relevant documentation,
or click on Next to email a description of your issue to Siemens Technical Support staff.
Siemens IA/DT Technical Support Center: phone +49 (0)911 895 7222

1)
HART is a registered trademark of HART Communication Foundation.
7ML19985XU81

Disclaimer of Liability

While we have verified the contents of this manual
for agreement with the instrumentation described,
variations remain possible. Thus we cannot guar-
antee full agreement. The contents of this manual
are regularly reviewed and corrections are
included in subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
SITRANS LUT400 (HART)
1)
).
Page EN-1