Siemens SITRANS LUT400 Betriebsanleitung Seite 28

K Factor
(PMD = EXPONENTIAL DEVICES)
The constant used in the flow calculation formula for absolute calculation of an
exponential device only.
Value
V-Notch Angle
(PMD = THIN PLATE V-NOTCH WEIR)
The V-Notch angle used in the flow calculation formula.
Value
Slope
(PMD = TRAPEZOIDAL FLUME or ROUND PIPE)
The Flow Slope used in the flow calculation formula.
Value
Roughness Coefficient
(PMD = ROUND PIPE)
The Flow Roughness Coefficient used in the flow calculation formula.
Value
Page EN-26
Range: -999.000 to 9999.000
Default: 1.000
Range: 25.000 to 95.000
Default: 25.000
Range: -999.000 to 9999.000
Default: 0.000
Range: -999.000 to 9999.000
Default: 0.000
SITRANS LUT400 (HART) 7ML19985XU81