Appliance Description; View Of The Appliance Cold Food Mobile Bain Marie - HUPFER KSPA-3 Betriebsanleitung

Description and Technical Data

Appliance Description

3.4 Appliance Description
3.4.1

View of the appliance cold food mobile bain marie

Figure 1
1 Cut-out for gastronorm container
2 Door retainer
3 Extension for drain plug
4 Swivel caster without total brake
5 Peripheral frame
3.4.2 Appliance Description
Cold food mobile bain maries are intended for receiving flat gastronorm containers. They are made of high
quality stainless steel and are executed in strong self-supporting construction.
In the top plate of the appliance, there are two (KSPA-2) or three (KSPA-3) cut-outs for inserting one con-
tainer GN 1/1-65 each. The cut-outs in the top plate are directly connected with the cabinet below. The cabi-
net compartments are suitable for storage of products in GN 1/1 containers or their subdivisions. All cabinet
compartments are ideal for receiving GN 1/1-65 standard containers. They have seven pairs of insert rails at
a distance of 0.04'' (75 mm). The upper inserts are intended for receiving the cold storage plates.
The cabinets are separated from each other by one or two middle walls. One cold storage plate each is in-
serted vertically into the middle walls. Together with one transversely inserted plate per cabinet, the contain-
er suspended in the top plate and the GN containers in the lower part can be cooled equally.
The cabinet doors can be firmly fixed in either shut or opened condition by the door retainer. Double-walled
wing doors with sealing ensure that the ambient heat does not get into the base construction.
Protection against collision is guaranteed by the lower peripheral frame on the trolley. Two ergonomically
formed push bars with integrated bumper protect your hands against injuries.
Cold food mobile bain maries are equipped with four swivel casters, two of which have total brakes that pre-
vent the appliance from moving. Push bars with integrated bumper protect your hands against injuries.
The cold storage plates are filled with cooling salt water (cooling brine). Nutritionally, plastic housings and
coolant are totally harmless.
4330040_A2
View of the appliance KSPA-3
6
7
8
9
10
Swivel caster with total brake
Middle wall for receiving cold storage plate
Beads
Support for cold storage plate
Push bar
Chapter 3
Page 13
Cold Food Mobile Bain Marie
KSPA-2 | KSPA-3