Setting Up The Operator Position - Jungheinrich EFG 113 Betriebsanleitung

3.4

Setting up the operator position

Procedure
• Before starting to travel, adjust the driver's seat, steering column and armrest (if
necessary) so that all the controls are within reach and can be applied without
having to strain.
• Adjust the visibility aid equipment (mirrors, camera systems etc.) so that the
working environment can be clearly seen.
3.4.1 Adjusting the driver's seat
WARNING!
Risk of accidents and damage to health
An incorrectly adjusted driver's seat can result in accidents and damage to health.
Do not adjust the driver's seat while travelling.
The driver's seat should lock in position after adjustment.
Check and adjust the individual driver's seat setting before starting to use the truck.
Hold the weight setting lever (92) only by the recess, do not reach through
underneath the lever.
61