Jungheinrich EFG 113 Betriebsanleitung Seite 127

Safety restraint system / SUN protector
Chassis and Superstructure
Make sure restraint system is complete, test operation and check for
1
damage.
Impact sensor
Electrical System
1 Check impact sensor is secure and check for damage.
Sideshifter
Hydraulic operations
Check attachment is properly secured to the truck and the
1
supporting elements.
Attachment: check bearing points, guides and stops for wear and
2
damage, grease and clean these components.
3 Check the cylinder piston rods and bushings.
4 Test the sideshifter, check the settings and check for damage.
5 Test the hose reel and check for leaks and damage.
6 Test attachment, check settings and check for damage.
7 Check cylinder seals.
8 Check the sliding blocks are complete.
Check the axial play of the front and rear rollers and adjust if
9
necessary.
10 Check hydraulic ports and tighten if necessary.
11 Attachment: clean and lubricate.
Seat heating
Electrical System
Check electric wiring for damage [insulation damage, connections].
1
Make sure wire connections are secure.
Road traffic approval (StVZO)
Electrical System
1 Test lighting.
126
W A B C
t
W A B C
t
W A B C
t
t
t
t
t
t
t
t
t
t
t
W A B C
t
W A B C
t