Approved Application Conditions - Jungheinrich EFG 113 Betriebsanleitung

3

Approved application conditions

DANGER!
Do not exceed the permissible surface and spot load limits on the travel routes.
At blind spots get a second person to assist.
The driver must ensure that the loading dock / ramp cannot move or come loose
during loading / unloading.
– Operation in industrial and commercial environments.
– Permissible temperature range -20°C to 40°C.
– Operation only on secure, level surfaces with sufficient capacity.
– Operation only on routes that are visible and approved by the proprietor.
– Negotiating inclines up to a maximum of 15 %.
– Do not negotiate inclines crosswise or at an angle. Transporting loads downhill.
– Operation in partially public traffic.
WARNING!
Extreme conditions
Special equipment and authorisation are required if the truck is to be constantly
used in extreme conditions, especially in dusty or corrosive atmospheres.
The truck is not authorised for use in areas at risk of explosion.
In adverse weather conditions (thunder, lightning) the industrial truck must not be
operated outside or in endangered areas.
12