Jungheinrich EFG 113 Betriebsanleitung Seite 93

4.14.2 Solo Pilot with control of ZH1 and ZH2 hydraulic ports
Z
Depending on the attachments used the lever
/ button (107, 109, 110) is assigned the
function of the attachment. Levers that are not
required are void. For connections (see
"Fitting additional attachments" on page 94).
Procedure
• Operating the hydraulic port ZH1:
Move the lever (109) in direction V or R.
• Operating the hydraulic port ZH2:
Press the toggle switch (110) and at the same
time move the lever (107) in the V or R
direction.
The attachment's function is performed.
92
109
V
110
R
107