Jungheinrich EFG 113 Betriebsanleitung Seite 64

Adjusting the backrest
Procedure
• Sit on the driver's seat.
• Pull the lever (95) to adjust the backrest.
• Adjust the backrest tilt.
• Release the lever (95) again. The backrest is locked.
The backrest is now set.
Z
Hold the weight setting lever (92) only by the recess, never reach through
underneath the lever.
Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause injury
An unsecured driver's seat can slide out of its guide during travel, resulting in
accidents.
The driver's seat must be locked in position.
Do not adjust the driver's seat while travelling.
Procedure
• Sit on the driver's seat.
• Pull up the driver's seat locking lever94 in the direction of the arrow.
• Push the driver's seat forwards or backwards to the desired position
• Engage the driver's seat locking lever (94) in position.
The seat position is now correctly set.
63